It is made from medical grade materials, and comfortable to use;

The special design of the structure at the bottom of the cup prevents the tube from readily fall-off;

When the oxygen flow rate is 2.5L/min, the atomized droplets in 1-5µm can reach about 60%, which means significant oxygen cost saving;

With the anti-dumping design, the cup body can be tilted up to 90° without liquid outflow, which avoids accidentally splashing of medicine;

The regulating valve on the top can provide different efficiencies of atomization output so as to meet different clinical needs；

Rotating the top screw cap can adjust the amount of fog

Constant oxygen flow rate allows the patient to breathe smoothly and comfortable.

[Instruction for use]：

（1）Check whether the small package is damaged;

（2）Tear off the small package and take out the nebulizer;

（3）Connect one end of the inhalation tube to the compressed air source

（4）Open the lid of the nebulization cup, take out the inner part of the nebulization cup, and inject the liquid medicine into the nebulization cup, and the injection amount shall not exceed the maximum scale of the nebulization cup. Reinsert the inner part of the atomization cup and tighten it.

（5）Install the mask (or mouthpiece) on the nebulization cup, and insert the other end of the inhalation tube into the port at the bottom of the nebulization cup.

（6）Turn on the gas source switch, adjust the gas flow, and start the aerosol inhalation treatment.